1.Product description
Silicone rubber MoS2 Solid lubricant film technology is the best way to solve the wear surface of silicone rubber, silicone rubber products after MoS2 treatment can achieve the performance on a qualitative leap, greatly enhance the added value of products, to increase the economic efficiency of enterprises. MoS2 technology uses a unique coating process, the lubricant and silicone rubber products can be immediately firmly integrated, the film thickness of 15-20 microns.
Chemical properties are stable and non-toxic. Silicone rubber MoS2 Solid Lubricating Film Technology reflects the technology and the upgrading of products, solve a lot of enterprises are struggling with technical problems, and greatly improve the added value of the products, increasing economic benefit of the enterprise. My company cited the silicone rubber MoS2 Solid lubricant film technology, has been providing services for domestic users, provides great convenience for the original use of the technology in foreign industrial users, but also create the conditions for the application of lowering the threshold for domestic users.
The silicone rubber MoS2 lubricating coating is a lubricant containing ultrafine molybdenum disulfide (MoS2). Wear resistant, durable and effective. Continuous lubrication operation, low temperature -20 degrees, high temperature 130 degrees, intermittent up to 150 degrees. Strong adhesion, lubrication film is not easy to fall off, long life, good effect. Good wear resistance.
2. Advantages of silicone rubber molybdenum disulfide solid lubricant coating
2.1. Reduce friction coefficient, reduce wear, occlusion and so on.
2. 2.To overcome or reduce mechanical lubrication problems, improve mechanical efficiency and service life.
2. 3. Can eliminate or reduce by friction, friction and other equipment caused by the maintenance and maintenance problems.
2. 4.The surface of the object can reach 100% lubrication.
2. 5.The friction coefficient can be reduced to 0.06-0.08.
3. Application method of silicon rubber molybdenum disulfide solid lubricating coating
In the normal humidity environment, the workpiece surface cleaning rust oil cleaning, by dipping, spraying, the coating to the surface of silicone rubber. Make reference to the specific production process.
Four. Matters needing attention of silicon rubber molybdenum disulfide solid lubricant coating
Please do not make the product contact with eyes, if accidentally splashed into the eyes, can raise eyelid, rinse with water or saline; can not be swallowed, if swallowed, do not induce vomiting, keep the rest, timely medical care.