ZBY-809 high temperature resistant molybdenum disulfide lubricating coating
- Brand MoS2 coating
- Model ZBY-801 1kg¡¢5k¡¢20kg
Molybdenum disulfide is the main material of this product. It is mixed with high efficiency curing agent and film forming assistant. It has excellent high temperature resistance, wear resistance, lubricity and high adhesion. It can be applied to the surface of aluminum, stainless steel, iron and non-metal substrates. The coating has the functions of temperature resistance, wear resistance, lubrication and self repairing, micro pits and concave functions. It should be widely used in many industrial fields that need to achieve the above functions. This product is safe, non-toxic and contains no heavy metals.
2.1.Basic properties: lubrication, wear resistance, extreme pressure resistance, corrosion resistance;
2.2.Good adhesion: it can reach 1 grade on metal, cement and other substrates;
2.2.Re coating good: coated film can be properly treated and then painted;
2.3. Curing condition: it can be cured at room temperature and can be cured by heating;
2.4. Coating temperature resistance: 600¡æ;
2.5. Repair function: the substrate surface of the pit pit has a very good repair function;
3. Product usage
Apply to iron, cast iron, aluminum, copper, stainless steel, stainless iron and other substrate surface.
4.1. Guarantee the workpiece surface clean, dry, no oil, no dust;
4.2.If the metal surface is used, it is strongly recommended that the surface be sand treated;
4.3. Paint mix evenly, spray, brush or dip coating workpiece;
4.4. Drying at room temperature, 72hr curing or heating, 180¡æ 30min;
4.5. Don't coat it too thick at once. When the thickness requirements, you can wait to dry again, and then sprayed second times, later than this;
4.6. An idle coating does not have the attributes described. The surface coating of the workpiece needs to be cooled or worked hard before use;
4.7.Requires safety during use, avoid contact with eyes and skin;
4.8.Coating viscosity deployment according to technological requirements, and use our special thinner.
5. Packing and storage, shelf life
5.1. Packaging: 1kg, 5kg, 20kg;
5.2. Stored in a cool and ventilated place, shall not touch the acid, alkali, salt, avoid high temperature, prevent sun and rain, transported by dangerous goods;
5.3.Validity: 90 days (25¡æ).